HP Pavilion 13 x2 Maintenance And Service Manual page 73

6. If you need to remove the HDMI/dock connector, disconnect the HDMI/dock cable (1) from the system
board connector.
7. Lift the cable to disengage the adhesive that secures it in the routing path (2).
8. Lifting the tape from bottom connector (3), and then disconnect the HDMI/dock cable from the
connector on the audio board (4).
NOTE: The HDMI/dock cable is included in the audio board kit, spare part number 732284-001.
Reverse this procedure to install the audio board.
Tablet components 63