Table of Contents
Advertisement
Power connector
Description
Power connector
Before removing the power connector, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Disconnect the tablet from the keyboard dock (see
on page
5.
Remove the base enclosure (see
6.
Remove the battery (see
7.
Remove the hinge assembly (see
Remove the power connector:
Lift the power connector up and out of the dock.
▲
Reverse this procedure to install the power connector.
30).
Battery on page
Releasing the tablet from the keyboard dock
Base enclosure on page
36.
Hinge assembly on page
Spare part number
732288-001
31.
34.
Dock components
41
Advertisement
Table of Contents
