Table of Contents
Advertisement
Battery cable
You do not have to remove the internal battery before removing several internal components. However, if
you leave the battery installed while removing components, be sure to disconnect the battery cable from the
system board to remove power from internal components.
Before disconnecting the battery cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Disconnect the tablet from the keyboard dock (see
on page
5.
Remove the display rear cover (see
Disconnect the battery cable:
Lift the tape on top of the connector (1), and then disconnect the battery cable from the system board
▲
connector (2).
44
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
30).
Releasing the tablet from the keyboard dock
Display rear cover on page
43).
Advertisement
Table of Contents
