Power Button Board - HP ZBook 17 G5 Maintenance And Service Manual

Power button board

Description
Power button board
Before removing the power button board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the any smart cards and memory cards.
5. Remove the bottom cover (see
6. Remove the battery (see
7. Remove the memory modules (see
8. Remove the ODD (see
9. Remove the SSDs (see
10. Remove the middle cover (see
11. Remove the fans (see
12. Remove the system board (see
Remove the power button board:
1. Lift the thermal tape (1) covering the board.
2. Remove the 2 Phillips M2.5×5.0 screws (2) that secure the power button board.
Service door on page
Battery on page 43).
Memory modules on page
ODD on page 48).
Solid-state drive (SSD) on page
Middle cover on page
Fans on page 70).
System board on page
41).
51).
46).
61).
72).
Component replacement procedures
Spare part number
L28466-001
81