Power Button Board - HP ZBook 15v G5 Maintenance And Service Manual

Power button board

Table 5-14 Power button description and number
Description
Power button board (includes rubber and thermal grease)
Power button board cable (includes thermal pad kit and thermal grease)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the hard drive (see
7. Remove the USB board (see
8. Remove the CPU fan (see
To remove the power button board:
1. Remove the tape from the board (1).
2. Using a Phillips P0 screwdriver, remove the Phillips broad head PM1.6×1.8 screw (2) that secures the
power button board to the computer.
3. Remove the power button board from the computer (3).
Bottom cover on page
Battery on page 40).
Hard drive on page 48).
USB board and security bracket on page
Fans on page 51).
38).
57).
Component replacement procedures
Spare part number
L30366-001
L20352-001
61