Select Program Setting - Sunbeam Bakehouse Compact BM2100 Instruction/Recipe Booklet And Guarantee

Select Program Setting

1. To select a program setting use the Menu
button. Each press of the Menu button will
move to the next program. (from 1. Basic
to 6. Dough).
The indicator light of the selected program
will illuminate.
2. To start, press the Start/Stop button.
To cancel operation at any time, hold the
Start/Stop button down for 2-3 seconds.
Avoid opening the lid at any time during
the bread cycle unless adding fruits or nuts
when indicated.
The table to the right illustrates the
program settings.
To add fruit or nuts
You are able to add fruit or nuts on settings
(1) Basic and (3) Sweet when you hear short
beeps (approximately 15-20 minutes into the
cycle).
Open the lid and add any fruits or nuts
that the recipe requires as the machine is
kneading. Close the lid and the Bakehouse
will automatically continue the cycle.
At the end of the baking cycle the machine
will beep, the Start/Stop light will flash and
automatically switch to a Keep Warm cycle
for 60 minutes. Warm air will circulate
throughout the baking chamber, to help
reduce condensation.
The bread can be removed from the baking
chamber at the end of the cycle or any time
during the Keep-Warm cycle. Simply press
the Start/Stop button to end the Keep-Warm
period and turn off the breadmaker at the
powerpoint.
MENU SETTING
1 Basic
2 Whole Wheat
3 Sweet
4 French
5 Cake
6 Dough
To remove the bread from the Bakehouse
The bread pan will be hot after the baking
cycle. Use a kitchen mitt to remove the pan
from the baking chamber. Gently pull the pan
out.
Allow the bread to cool in the bread pan for
10 minutes before removing. Turn the pan
upside down and shake until the bread slides
out. If necessary, use a plastic spatula to
loosen bread from the sides of the pan.
Allow the bread to cool on a wire rack for
at least 10 minutes before slicing. For easy
slicing we recommend the use of an electric
knife or a quality bread knife.
After using your Bakehouse, unplug the
machine and allow it to cool for 30 minutes
before commencing another program. If you
attempt to use the Bakehouse too soon, it
will not turn on and will beep indicating the
Bakehouse has not cooled sufficiently.
Press the Start/Stop button and wait until the
Bakehouse has cooled.
FRUIT & NUT
BEEPER


10