Table of Contents
Advertisement
71
5. Network Configuration
Using Wi-Fi Remote Control
You can access the Wi-Fi remote control
built into the camcorder from a smartphone,
tablet, or other device over a wireless LAN
connection.
Using the Wi-Fi remote control allows you to
operate the camcorder remotely. This allows
you to start/stop recording or configure
settings remotely, and is useful in applications
where the camcorder is fixed in a remote
location or mounted on a crane, for example.
Displaying the Wi-Fi Remote
Control
The Wi-Fi Remote screen is automatically
resized to match the screen size of the
connected device.
1
Connect the camcorder to the Internet
using the procedures in "Connecting
Devices using Wireless LAN" (page 57)
and "Connecting to the Internet"
(page 61).
2
Launch a browser on the device and enter
"http://<IP_address>/rm.html" in the URL
bar, where "<IP_address>" is the IP
address (Maintenance >Network >IP
Address (Wireless) in the setup menu) of
the camcorder.
For example, if the IP address is
192.168.1.1, enter "http://192.168.1.1/
rm.html" in the URL bar.
3
Enter the user name and password
(Maintenance >Access Authentication
(page 112) in the setup menu) on the
browser screen.
When connection is successful, the Wi-Fi
Remote screen appears on the device.
You use the Wi-Fi Remote screen to
operate the camcorder.
You can disable the REC button operation
by sliding the Lock knob to the right on
the screen.
You can also display the Wi-Fi remote
control using [Cam Remote Control]
(page 73) from the web menu.
[Notes]
ˎ To display the page for a smartphone, change "rm.
ˎ
html" to "rms.html" in the URL. To display the page for
a tablet, change "rm.html" to "rmt.html" in the URL.
When "rm.html" is entered, the page automatically
switches for display on the corresponding device.
However, the appropriate page may not be displayed,
depending on the device.
ˎ The Wi-Fi Remote screen may not match
ˎ
the camcorder settings under the following
circumstances. If this occurs, reload the browser
window.
‒ If the camcorder is restarted while connected
‒ If the camcorder is operated directly while
connected
‒ If the device has been reconnected
‒ If the browser Forward/Back buttons have been
used
ˎ The Wi-Fi remote control may not function if the
ˎ
wireless signal strength becomes weak.
Wi-Fi Remote Screen
(Smartphones)
Main screen
ˎ Status display
ˎ
ˎ Shooting settings
ˎ
Iris, Focus, Zoom, S&Q FPS,
Shutter, White, Gamma, Auto
Iris, Gain, ATW, Color Bars,
Auto Black, Auto White
Playback screen
ˎ Status display
ˎ
ˎ Playback control buttons
ˎ
F Rev, Play/Pause, F Fwd,
Prev, Stop, Next
Cursor screen
ˎ Status indicators
ˎ
ˎ Cursor control buttons,
ˎ
menu/status display
Up, Left, Set, Right, Down,
Cancel/Back, Menu, Status,
Thumbnail, Option (SHIFT
+ SET)
Assign screen
ˎ Status display
ˎ
ˎ Assignable switches
ˎ
Assignable switch 0, 1, 3, 4, 5
Advertisement
Table of Contents
