Using The Wi-Fi Remote Commander - Sony PMW-150 Operating Instructions Manual

Example (when the IP address is
"192.168.1.10"): Type "http://
192.168.1.10/" in the address bar.
If the connection is complete, a dialog
appears asking you to enter the user name
and password.
2
Enter the user name and password, and
click [OK].
User name: admin
Password: pmw-150 (Lower-case the model
name.)
To upload a planning metadata file
1
Insert a media such as an SxS memory
card.
2
Click "Upload" in the Web menu.
The Planning Metadata screen appears.
3
Click "Select" to show Choose File
dialog.
4
Select the planning metadata file you
want to upload, and then click "Open".
The path of the selected file appears.
5
Click "Execute".
The planning metadata file is loaded into the
camcorder's memory and stored in the
media.
"OK" appears in the Status field when the
transfer is complete.
Using the Wi-Fi Remote
Commander
When a Wi-Fi connection is established between
a device such as smartphone, tablet, PC, etc., and
the camcorder, the Wi-Fi remote commander
appears on the device screen and the device can
be used as a remote commander.
You can start/stop recording, adjust iris/focus/
zoom, etc., with a Wi-Fi connected device. This
function is useful for setting the camcorder in a
remote place, such as the top of a crane, etc.
Note
When iris is not set to auto, "IRIS" slider operation and
ON/OFF setting of "Auto IRIS" are not available.
32 Using a Wi-Fi Adapter
The displays of Wi-Fi remote commander
For smartphone
For Tablet
To display the Wi-Fi remote commander
To display the Wi-Fi remote commander on a
device screen, settings are required on both the
device and camcorder.
Camcorder settings
1
Set OTHERS > Wi-Fi > Wi-Fi to
[Enable] in the setup menu.
2
Set OTHERS > Wi-Fi > Wi-Fi Remote
to [On] in the setup menu.
Device settings
Set the smartphone, tablet, PC, etc., to be used as
the Wi-Fi remote commander.