Table of Contents
Advertisement
50
4. Shooting: Advanced Operations
Recording format of
System
Recording
main clip
frequency
format of
subclip
ˎ XAVC-I
ˎ
29.97, 25,
MPEG HD422
3840×2160P
23.98
1920×1080P,
ˎ XAVC L200 2160P
ˎ
XAVC-L50
ˎ XAVC-L
ˎ
1920×1080P
3840×2160P
59.94, 50
MPEG HD422
1920×1080i,
XAVC-L50
1920×1080P
[Note]
SD cards cannot be used in 1-slot Simul Rec mode.
Setting 1-slot Simul Rec
1
Select Operation >Rec Function >4K & HD
(Sub) Rec in the setup menu.
2
Turn the MENU knob to select [On], then
press the knob.
[Notes]
ˎ With the exception of some functions
ˎ
special recording function, such as 1-slot Simul
Rec, can be used at any one time.
ˎ With the exception of some functions
ˎ
another special recording mode is enabled
while using 1-slot Simul Rec, 1-slot Simul Rec is
automatically released.
ˎ 1-slot Simul Rec cannot be set during recording,
ˎ
playback, or while the thumbnail screen is
displayed.
a) Picture Cache Rec is also supported in 1-slot
Simul Rec mode.
3
Select HD (Sub) Rec Format, and specify
the subclip recording format.
Starting 1-slot Simul Rec recording
Shoot as described in "Basic Operations"
(page 44).
During recording, "/Sub" is displayed on the
right of the recording format (codec) indicator
on the viewfinder screen (page 17).
To exit, stop the recording.
Canceling 1-slot Simul Rec mode
With the camcorder in recording standby
mode, set Operation >Rec Function >4K & HD
(Sub) Rec in the setup menu to Off.
Playback of subclip recording format
1
Select Operation >Input/Output >Output
Format >HD 1920×1080 in the setup menu.
2
Select Operation >Rec Function >HD (Sub)
Playback Mode >On in the setup menu.
3
Press the PLAY button to start playback.
In this mode, only subclips can be played.
The 4K QFHD main clips are skipped.
Subclips can also be selected on the
thumbnail screen.
[Notes]
ˎ Subclips cannot be played when the 1-slot Simul
ˎ
a)
, only one
Rec function is set to Off.
ˎ Thumbnail menu clip operations (page 79)
ˎ
on the thumbnail screen apply to the main
, if
a)
clip. Subclip operations are not supported. To
perform operations on a subclip, copy it as a
main clip as described in "Copying and Saving a
Subclip as a Main Clip" below, and then perform
clip operations.
Copying and Saving a Subclip as a
Main Clip
You can copy a subclip created using 1-slot
Simul Rec and save it as a main clip on other
media.
1
Load the media on which the subclip
created using 1-slot Simul Rec was
recorded into a card slot.
2
Load media in the other card slot.
3
Select Thumbnail >Copy Sub Clip >All Clips
in the setup menu.
[Note]
Subclips cannot be selected individually.
4
Turn the MENU knob to select [Execute],
then press the knob.
A confirmation screen appears.
5
Turn the MENU knob to select [Execute],
then press the knob.
All subclips are copied as main clips, and
a completion message appears.
6
Press the MENU knob to dismiss the
message.
Advertisement
Table of Contents
