Table of Contents
Advertisement
82
6. Clip Operations: Clip Operations on the Thumbnail Screen
ˎ A message appears if there is not enough free space
ˎ
on the copy destination SxS memory card. Exchange
the card for one with more free space.
ˎ When multiple clips are recorded on the source SxS
ˎ
memory card, it may not be possible to copy all clips
even when the source and destination memory cards
have the same capacity, depending on the memory
characteristics and usage of the memory cards.
ˎ When clips created in 1-slot Simul Rec mode are
ˎ
copied, both the main clip and subclips are copied.
Copying a specific clip
1
Select Thumbnail >Copy Clip >Select Clip
in the setup menu.
2
Turn the MENU knob to select [Execute],
then press the knob.
The clip selection screen appears.
3
Turn the MENU knob to select a clip to
copy, then press the knob.
A check mark is attached to the selected
clip.
4
Press and hold the SHIFT button, and
press the SET button.
A confirmation screen appears.
5
Turn the MENU knob to select [Execute],
then press the knob.
The clip is copied, and a completion
message appears.
6
Press the MENU knob to dismiss the
message.
Copying all clips
You can copy all clips stored on the same SxS
memory card at the same time to another SxS
memory card.
1
Select Thumbnail >Copy Clip >All Clips in
the setup menu.
2
Turn the MENU knob to select [Execute],
then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select [Execute],
then press the knob.
All clips are copied, and a completion
message appears.
4
Press the MENU knob to dismiss the
message.
Deleting Clips
You can delete clips from SxS memory
cards. Clips can be deleted on the thumbnail
screen or the filtered clip thumbnail screen
(page 83).
[Note]
When clips created in 1-slot Simul Rec mode are deleted,
both the main clip and subclips are deleted.
1
Select Thumbnail >Delete Clip >Select Clip
in the setup menu.
2
Turn the MENU knob to select [Execute],
then press the knob.
The clip selection screen appears.
3
Turn the MENU knob to select a clip to
delete, then press the knob.
A check mark is attached to the selected
clip.
4
Press and hold the SHIFT button, and
press the SET button.
A confirmation screen appears.
5
Turn the MENU knob to select [Execute],
then press the knob.
The clip is deleted, and a completion
message appears.
6
Press the MENU knob to dismiss the
message.
The clips below the deleted clip on the
thumbnail screen move up one position.
Deleting all clips
You can delete all clips stored on the same SxS
memory card at the same time.
[Notes]
ˎ Deleted clips cannot be restored.
ˎ
ˎ If the media or clip is protected, this function is
ˎ
disabled.
1
Select Thumbnail >Delete Clip >All Clips in
the setup menu.
2
Turn the MENU knob to select [Execute],
then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select [Execute],
then press the knob.
All clips are deleted, and a completion
message appears.
4
Press the MENU knob to dismiss the
message.
Transferring Clips
Clips (original files) recorded on SxS memory
cards and proxy files recorded on SD cards
can be uploaded to a server using Thumbnail
>Transfer Clip and Transfer Clip(Proxy),
respectively, in the setup menu.
For the Thumbnail >Transfer Clip procedure,
see "Transferring Original Files using the
Thumbnail Screen" (page 67).
For the Thumbnail >Transfer Clip(Proxy)
procedure, see "Transferring Proxy Files using
the Thumbnail Screen" (page 65).
[Note]
When clips created in 1-slot Simul Rec mode are
transferred using Thumbnail >Transfer Clip, only the
main clip is transferred.
Advertisement
Table of Contents
