Table of Contents
Advertisement
7
1. Overview: Name and Function of Parts
are canceled. Pushing this switch up to
this position again cancels the previous
settings.
Pushing this switch up to this position
before a setting is changed in the setup
menu or after a setting change is canceled
in the setup menu displays the message to
confirm whether the setting is reset to the
initial value. Pushing this switch up to this
position again resets the settings to the
initial value.
ESCAPE: Use this switch when the menu
page, which has a hierarchical structure, is
opened. Each time the switch is pushed to
this position, the page returns to one stage
higher in the hierarchy.
Use the switch in the following way when the
menu is not displayed.
CANCEL/PRST: Each time this switch is
pushed upward, a window to confirm
the menu settings and status of the
camcorder appears on the viewfinder
screen (page 13). The window consists
of several pages, which are switched each
time the switch is pushed upward.
ESCAPE: To clear the page, push this switch
down to the OFF position.
13.
UTILITY SD card slot
Insert an SD card for saving camcorder
settings.
14.
ACCESS indicator
Lights up orange when the SD card is being
accessed.
LCD Monitor Side (2)
[2]
[1]
7
8
9
10
11 12
1
2
3
4
5
6
13
14
15
16
17
1.
Built-in speaker
The speaker can be used to monitor E-E
1)
sound during recording, and playback
sound during playback. The speaker also
sounds alarms to reinforce visual warnings
(page 142).
If you connect earphones to the EARPHONE
jack, the speaker output is suppressed
automatically.
1) E-E: Abbreviation of "Electric-to-Electric." In E-E mode,
video and audio signals input to the camcorder are
output after passing through internal electric circuits
only. This can be used to check input signals.
2.
LCD monitor
Displays remaining battery capacity, remaining
media capacity, audio levels, time data, and
so on. It also allows you to check camera and
playback pictures (page 13).
You can adjust the position and angle of the
LCD monitor.
3.
WARNING indicator
Lights up or flashes when an abnormality
occurs (page 142).
4.
ACCESS indicator
Lights up in blue when data is written to or
read from the recording media.
5.
Audio control section (page 9)
6.
Thumbnail screen operation section
(page 9)
7.
F REV (fast reverse) button and indicator
This plays back at high speed in the reverse
direction. The playback speed changes in the
Advertisement
Table of Contents
