Table of Contents
Advertisement
3
1. Overview
Name and Function of Parts
Power Supply
1
2
1.
LIGHT (video light) switch
Determines how a video light connected to
the LIGHT connector (page 4) is turned on
and off.
AUTO: When the POWER switch of the video
light is in the on position, the video light
is turned on automatically while the
camcorder is recording.
MANUAL: You can turn the video light on or off
manually, using its own switch.
6
3
4
5
[Note]
When the camcorder is set for recording in Picture Cache
Rec mode, it is not possible to turn on the light before
operation to start recording is carried out (or while data
is being stored in memory).
2.
POWER switch
Turns the main power supply on () and off
().
3.
DC IN (DC power input) connector (XLR
type, 4-pin, male)
4.
DC OUT 12V (DC power output) connector
(4-pin, female)
Supplies power for the CBK-DL1 USB Adaptor
and HDVF-L750 Viewfinder (maximum 1.8 A).
5.
Battery attachment shoe
Attach a BP-GL95B Battery Pack. Alternatively,
you can attach an AC-DN10A AC Adaptor to
operate the camcorder from an AC power
supply.
"Preparing a Power Supply" (page 20)
[Note]
For your safety, and to ensure proper operation of the
camcorder, Sony recommends the use of the BP-GL95B
Battery Pack.
6.
Camera adaptor connector (Japanese
model only)
Enables connection of a CA-TX70/FB70 HD
Camera Adaptor. To connect an adaptor,
remove the cover.
[Note]
Not supported in the return video display by the
camcorder.
Advertisement
Table of Contents
