Table of Contents
Advertisement
145
11. Appendix
Messages Displayed During Operation
This section describes the meaning of messages that may be displayed in response to button, switch, or knob operation.
[Notes]
ˎ Covers only the messages displayed about possible causes in response to an operation.
ˎ
ˎ Messages displayed when an operation is attempted while a menu item cannot be selected (grayed out) are not described.
ˎ
Operation
REC button was pressed
Assignable switch assigned with XAVC Proxy
Rec Start was operated
PREV button was pressed
F REV button was pressed
PREV + F REV buttons were pressed
PLAY button was pressed
NEXT button was pressed
F FWD button was pressed
NEXT + F FWD buttons were pressed
Media slot was changed
Recording media was removed
Message
Media not exist
Media(Proxy)
Cannot Record
No Media in Slot(Proxy)
Media(Proxy)
Cannot Record
Media(Proxy) Error
Media(Proxy)
Cannot Record
Media(Proxy): Write Protected
Media(Proxy)
Cannot Record
NG: Preparing
Media(Proxy)
Cannot Record
No Media in Slot(Proxy)
Media(Proxy)
Cannot Record
Media(Proxy) Error
Media(Proxy)
Cannot Record
Media(Proxy): Write Protected
Media(Proxy)
Cannot Record
NG: Preparing
First Clip Top!
First Clip Top!
First Clip Top!
Last Clip End!
Last Clip End!
Last Clip End!
Last Clip End!
Cannot Switch Slots
Media removed
Meaning and possible cause
Cannot record because there is no recording media in an SxS card slot.
Proxy data recording mode is set to On, but cannot record proxy data because the proxy SD card is not inserted.
Cannot record proxy data because cannot write to the proxy SD card due to a media error.
Cannot record proxy data because the proxy SD card is write-protected.
Cannot record proxy data because the proxy data recording circuitry initialization is not completed.
Cannot record proxy data because the proxy SD card is not inserted.
Cannot record proxy data because cannot write to the proxy SD card due to a media error.
Cannot record proxy data because the proxy SD card is write-protected.
Cannot record proxy data because the proxy data recording circuitry initialization is not completed.
Cannot execute because the playback position is at the first frame of the first clip.
Cannot execute because the playback position is at the first frame of the first clip.
Cannot execute because the playback position is at the first frame of the first clip.
Cannot execute because the playback position is at the last frame of the last clip.
Cannot execute because the playback position is at the last frame of the last clip.
Cannot execute because the playback position is at the last frame of the last clip.
Cannot execute because the playback position is at the last frame of the last clip.
Cannot change slots during playback.
Media was removing while reading from recording media or while writing to recording media (ACCESS indicator is
lit).
Advertisement
Table of Contents
