Table of Contents
Advertisement
111
7. Menu Display and Settings: Maintenance Menu
Maintenance >Camera Config
Makes settings related to various camcorder operations.
Item
Setting
RM Rec Start
RM/Camera/PARA
Detail Control(RM/
HD/QFHD
RCP)
SET Key on
Pause/Play
Thumbnail
ALAC
Auto/Off
SD HDMI
On/Off
HD Modulation
High/Normal
Maintenance >Preset White
Makes settings related to white balance preset values.
Item
Setting
Color Temp <P>
1500K to
3200K
Description
Selects which of the recording start/stop
buttons are enabled when a remote control
unit is connected.
RM: Remote control unit
Camera: Camcorder
PARA: Both
Sets the signal format for detail control by an
RM/RCP in QFHD recording format to HD or
QFHD.
Selects the operation when the MENU knob is
pressed with only one thumbnail selected.
Sets whether to execute ALAC (Auto Lens
Aberration Correction) automatically.
Auto: Execute ALAC automatically when an
ALAC-compatible lens is attached and
ALAC is enabled.
Off: Do not execute.
[Note]
Depending on the aberration correction lens, the
aberration correction function may not be activated
immediately ("ALAC" does not appear on the
viewfinder screen) after turning the power on, even
when this setting is set to Auto. If this occurs, turn
the lens zoom ring and focus ring to the end stop
and back, and check whether the "ALAC" indicator
appears on the viewfinder screen.
Contact a Sony service representative for information
about aberration correction lenses.
Turns the HDMI output signal to SD format
conversion function on/off.
Sets the video resolution of the HD output
signal down-converted from the QFHD signal.
High: High resolution characteristic that uses
QFHD oversampling to emphasize detail.
Normal: Characteristic relatively close to
existing HD cameras (such as the PDW-750).
Description
to 50000K
Sets the white balance preset value.
Maintenance >Preset White
Makes settings related to white balance preset values.
Item
Setting
Color Temp Balance
–99 to
±0
to +99
<P>
R Gain <P>
–99 to
±0
to +99
B Gain <P>
–99 to
±0
to +99
AWB Enable <P>
On/Off
Maintenance >White Filter
Makes settings related to filters.
Item
Setting
ND Filter C.Temp
On/Off
ND FLT C.Temp<1>
3200K/4300K/5600K/6300K
ND FLT C.Temp<2-4>
3200K/4300K/5600K/6300K
Electrical CC<A>
3200K/4300K/5600K/6300K
Electrical CC<B>
3200K/4300K/5600K/6300K
Electrical CC<C>
3200K/4300K/5600K/6300K/
---
Electrical CC<D>
3200K/4300K/5600K/6300K/
---
Description
Sets the fine color temperature settings, for
use when a satisfactory image cannot be
obtained using Color Temp <P>.
Sets the R gain preset value.
Sets the B gain preset value.
Turns execution of the AWB (auto white
balance) function on/off when the WHITE BAL
switch is set to PRST.
Description
Turns the function that assigns electrical CC
filters to ND filters on/off.
Selects the color temperature when electrical
CC filters are assigned to ND filters (filter 1).
Selects the color temperature when electrical
CC filters are assigned to ND filters (filters 2 to
4).
Selects the color temperature when the
electrical CC filter switching function is
assigned to an assignable switch.
Selects the color temperature when the
electrical CC filter switching function is
assigned to an assignable switch.
Selects the color temperature when the
electrical CC filter switching function is
assigned to an assignable switch. Select "----"
if not using C.
Selects the color temperature when the
electrical CC filter switching function is
assigned to an assignable switch. Select "----"
if not using D.
Advertisement
Table of Contents
