Table of Contents
Advertisement
113
7. Menu Display and Settings: Maintenance Menu
Maintenance >Access Authentication
Sets settings related to access authentication.
Item
Setting
Password
*******
Generate Password
Execute/Cancel
Show Settings
Maintenance >Network
Makes settings related to network connections.
Item
Setting
Setting
On/Off
Wi-Fi Mode
Wi-Fi Access Point/
Wi-Fi
Station/Off
NFC
Execute/Cancel
WPS
Execute/Cancel
Channel
Auto(5GHz)/Auto/CH1/CH2/
CH3/CH4/CH5/CH6/CH7/CH8/
CH9/CH10/CH11
SSID & Password
(SSID display)
(Password display)
SSID
(SSID display)
Wi-Fi Station Remote
On/Off
Description
Sets the password for access authentication.
Valid passwords must be 8 characters or
longer, and contain at least one alphanumeric
character and at least one numeric character.
The entered password is displayed using
asterisks. The entered characters are visible
while the SHIFT key is pressed.
[Note]
The password setting is reset when updating the
firmware of the unit from a version prior to 2.0 to
version 2.0 or later, or a version prior to 3.1 to version
3.1 or later. In this case, set the password again.
Automatically generates a password for
access authentication.
Displays the user name and password for
access authentication.
Description
Turns the network function on/off.
Sets the operating mode for wireless LAN
connections.
Initiates a one-touch connection using NFC
(execute by selecting Execute).
Starts Wi-Fi Protected Setup (WPS) (execute
by selecting Execute).
Sets the wireless LAN channel.
[Note]
"Auto(5GHz)" may not be displayed, depending on
the wireless LAN module used.
Displays the SSID and password.
Displays the SSID of the access point of the
destination to which to connect in Wi-Fi
Station mode.
Enables/disables operation from a Wi-Fi
remote control, web menu, and the "Content
Browser Mobile" application when connected
to a network using Wi-Fi Station mode.
Maintenance >Network
Makes settings related to network connections.
Item
Setting
Wi-Fi Station Detail
Scan Networks (Execute/
Settings
Cancel)
SSID (SSID of access point)
Password (password of access
point)
DHCP (On/Off)
IP Address (DHCP/On:
automatically, DHCP/Off:
192.168.1.50)
Subnet Mask (DHCP/On:
obtain
automatically, DHCP/
Off: 255.255.255.0)
Gateway (DHCP/On:
automatically, DHCP/Off:
0.0.0.0)
DNS Auto (On/Off)
Primary DNS Server (DNS Auto/
On:
obtain
automatically, DNS
Auto/Off: 0.0.0.0)
Description
Starts auto detection of network destinations
for connection (execute by selecting Execute).
Enter the SSID of the access point of the
destination to which to connect in Wi-Fi
Station mode.
The following characters are valid.
Alphabetic (upper case): A to Z
Alphabetic (lower case): a to z
Numeric: 0 to 9
Symbols: !"#$%&'*+,/:;<=>?[\]^`{|}~
Enter the password of the access point of the
destination to which to connect in Wi-Fi
Station mode.
The entered password is displayed using
asterisks. The entered characters are visible
while the SHIFT key is pressed.
The following characters are valid.
Alphabetic (upper case): A to Z
Alphabetic (lower case): a to z
Numeric: 0 to 9
Symbols: !"#$%&'*+,/:;<=>?[\]^`{|}~
Sets DHCP in Wi-Fi Station mode.
When set to On, an IP address is automatically
assigned to the camcorder. To enter the
camcorder IP address manually, set to Off.
obtain
Enter the IP address of the camcorder.
Enabled only when DHCP is Off.
Enter the subnet mask of the camcorder.
Enabled only when DHCP is Off.
obtain
Enter the gateway for the access point.
Enabled only when DHCP is Off.
Enables/disables automatic DNS.
When set to On, the address of the DNS
server is obtained automatically.
Enter the primary DNS server for the router.
Enabled only when DNS Auto is Off.
Advertisement
Table of Contents
