Programming The Heating Mode - Sundance Spas MARIN 880 Series Owner's Manual

880 Series
= Home Button: Tap to go back to the Home Menu.
= Back Button: Tap to go back to the previous Menu.
A
A
= Invert Button: Tap to invert the display image.
= Scroll Buttons: Scroll up and down to view the selections
available.
12.1

Programming the Heating Mode

Your Sundance spa is equipped with 3 modes of heating, Figure 12.1a. An
automatic mode called "Auto" where the spa's temperature is maintained
at all times. An energy saving heating cycle called "Economy." A mode that
will only activate the heater during the daytime called "Day" mode.
Note: The heater will activate when the temperature drops 2°F from the
set temperature.
A
A
From the Settings Menu, tap
menu tab. Tap
heating settings.
A. Auto heating:
1. When programmed to "Auto," the spa will
maintain the water temperature to the
set temperature. Heating will occur when
necessary.
2. To select this mode, tap the "Auto" tab.
B. Economy heating:
1. This is an energy saving heating program that allows
the spa to heat during non-peak hours. When programmed to
"Economy," the spa will only be allowed to heat the water between
5:00 PM to 7:00 AM every day of the week. The hours cannot be
adjusted.
2. To select this mode, tap the "Economy" tab.
C. Day heating:
1. When programmed to "Day," the spa will only be allowed to heat the
water between 7:00 AM to 5:00 PM every day of the week. The hours
cannot be adjusted.
2. To select this mode, tap the "Day" tab.
58
SETTINGS
Information
Heat & Filter
Water Care
to the enter the menu. Then select one of the
Heat & Filter
A
A
Heat & Filter
Auto
Economy
Day
1
or to highlight the "Heat & Filter"
Filter 2
A
A
Heat & Filter
Auto
Economy
Day
1 Filter
Figure 12.1a
2