Selecting The Desired Massage Action; Adjusting Fluidix Reflex™, Nex™, St™, Intelli-Jet™ And Focus-Relief; Air Controls - Sundance Spas MARIN 880 Series Owner's Manual

880 Series
11.7

Selecting The Desired Massage Action

Your Sundance
to customize the massage action you desire. Each model
incorporates a massage selector(s) that allows you to
customize the massage and performance by diverting water between
various jet systems. Simply turn massage selector to position A (Combo),
B, or C to divert water pressure to various jet groups.
Note: This valve is designed to operate in positions A (Combo), B, and
C for optimum performance. It is considered normal for sound levels
within the valve to vary between positions due to the large amounts of
water flowing through it. For optimum filtration benefits, leave the valve
in position A when hot tub is covered. Select position B or C for maxi-
mum jet performance during hot tub use.
11.8 Adjusting Fluidix Reflex™, Nex™, ST™, Intelli-Jet™ And
Focus-Relief®
The jets in your new hot tub offer the advantage of no
moving parts and zero maintenance. They can also be adjusted
for a high and low impact massage, providing the ultimate
massage! To adjust jets:
1. Fluidix Nex/Intelli-Jets and Reflex Jets only: Turn outer dial
(A) clockwise to increase water volume. Turn outer dial
counterclockwise to decrease water volume or to shut jet off.
2. Fluidix Intelli-Jet only: Rotate center "mode disk" (B)
clockwise to select a non-oscillating water stream or turn
counterclockwise to select an oscillating stream at any
angle.
3. For a high impact massage, turn corresponding air control
knob clockwise. For the Fluidix ST jet, this will create
a straight water flow. For low impact massage, turn
corresponding air control knob counterclockwise. For the
Fluidix ST jet, this will create an oscillating flow. Refer to
Sections 9.1-9.22 (pages 22-40) for specific operation
details. The included tool (shown) allows you to position the
jet nozzle angle to your liking. This tool can also be used
to aid in the opening or closing of the nozzle on Fluidix
Reflex jets.
4. Focus-Relief Jets: Work with both the blower and jets pump. The
blower introduces air to the jet and the jets pump forces water through.
Note: Always keep at least 6 adjustable jets open at all times on each
jet system.
11.9

Air Controls

Each jet system has its own air control. These controls allow
you to regulate the amount of air which is mixed with the water
entering through the jets. Clockwise rotation adds more air and counter-
clockwise rotation reduces air flow.
Note: To minimize heat loss, close all air controls when spa is not in
use. Certain jets may draw air even though they are closed. This is
considered normal.
54
®
Spas hot tub is equipped to allow you
A B
Fluidix Intelli-Jet
A
Fluidix Reflex Jet
Fluidix ST Jet
Focus-Relief Jet