Operating Instructions; Activating The Jets Pumps And Blower - Sundance Spas MARIN 880 Series Owner's Manual

880 Series
= Error Indicator Icon: Displays when there is an error
message that needs to be addressed. The icon will also
appear at the Home Menu as a reminder, page 81. Tap to
view the condition that requires attention.
A
A
= Invert Button: Tap to invert the display image.
= Heater ON icon: Will display when the heater is on.
= Lock Button: Displays when one of the lock modes is
enabled, page 65.
= Wi-Fi icon: Will display when the Wi-Fi feature is on, page
64 (not applicable if the optional SmartTub™ system is
installed).
= Time Indicator: The time will always be shown when the
Home Menu is displayed. The appearance will vary depending
on whether the clock is set to a 12-Hour or 24-Hour
configuration, page 66. The default setting is 12-Hour.
Note: The time does NOT automatically adjust for daylight saving time.
The time must be manually adjusted.

11.0 Operating Instructions

Your Sundance ® Spas hot tub has a touch-sensitive control panel,
massage selector valves and air control knobs located on the top rim
of the hot tub (Sections 9.1-9.22, pages 22-40). These controls let
you operate many of the special functions of your Sundance hot tub. By
familiarizing yourself with the following information, you will be able to
gain the full benefits afforded by the various functions of your hot tub.
11.1

Activating the Jets Pumps and Blower

From the Home Menu, (Figure 11.1a), tap
panel will display the Jets Pump Submenu (Figure 11.1b).
Note: Once you enter the Jets Pump Submenu, all the pumps will acti-
vate. You can turn off the jets pump by tapping the jets pump button.
A
A
Figure 11.1a
48
12:42
PM
°
102
to enter the Submenu. The
A
A
JETS
1 2
Figure 11.1b
3