Plastic Ties Removal; Assembly Completion / Machine Set-Up - 3M Matic 7000r Instructions And Parts List

7. Installation
7.5 Removal of Plastic Ties
Cut the plastic which attaches the
top head to the frame and remove
the polystyrene blocks (Figure 7-4).
Cut the plastic strap which attaches
the strip and the EMERGENCY STOP
cable to the frame (Figure 7-5).
Cut the plastic ties holding the lower
taping head in position (Figure 7-6).
7.6 Assembly Completion /
Machine Set-up
Note – A tool kit consisting of metric open
(see the Technical Documentation /
Spare Parts-Order Section)
(continued on next page)
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 22
44-0009-2152-6 / ECO# 0078045
(continued)
end and hex socket wrenches is
provided with the machine.
These tools should be adequate
to set-up the machine, however,
other tools supplied by customer
will be required for machine
maintenance.
Figure 7-4
Figure 7-5
Figure 7-6
North American - ENG
Date Released:
05-22-18