LOCATION
This portable air conditioner must be installed on a flat and
dry surface. A minimum clearance of 500mm from walls or
other appliances is required as well as easy access to a
power point (GPO).
The air outlets and the ducting system must not be obstructed.
The appliance is fitted with a 1.2m flexible 2 pin
cord 220-240V 50Hz 10A.
IMPORTANT
The maximum duct extension is 1.8m in total.
Both factors are to be taken into account when
determining the location that the appliance will
be operated in.
DUCT ASSEMBLY
Front
19
1.
Place the Duct to Unit Adaptor (17) over the Exhaust Outlet (5), push it downwards to ensure it engages the
Exhaust Outlet tabs.
2.
Screw one end of the Exhaust Duct (16) into the Duct to Unit Adaptor (17).
3.
On the other end of the Exhaust Duct (16) fix either the Window Exhaust Duct Adaptor (15) or the Wall
Exhaust Adaptor (18).
Rinnai
14
20
18
5 0 0
m m
m m
5 0 0
7
5
13
17
11
INSTALLATION
m m
5 0 0
5 0 0
m m
8
9
Back
11
12
15
16
Portable Room AC OIM
10