Table of Contents
Advertisement
If the left and right seat backrests are not
engaged and locked in place, this will be shown
on the multifunction display on the instrument
cluster.
If the center seat backrest is not engaged and
locked in place, the red lock verification indica‐
tor will be visible.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by a Top
Tether. The Top Tether belt facilitates an
additional connection between the child
restraint system attached with LATCH-
type (ISOFIX) and the vehicle.
If necessary, slide head restraint
#
(
page 98).
/
Fold up cover
2
of Top Tether anchorage
#
3.
Install the LATCH-type (ISOFIX) child restraint
#
system with Top Tether. Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
Guide Top Tether belt
#
restraint
1
between the two head restraint
bars.
Hook Top Tether hook
#
4
into Top Tether anchorage
twisting.
1
upwards
Tension Top Tether belt 4. Comply with the
#
child restraint system manufacturer's instal‐
lation instructions when doing so.
Fold down cover
#
3.
If necessary, slide head restraint
#
wards (
page 98). Make sure that you do
/
Occupant safety
59
4
under head
5
of Top Tether belt
3
without
2
of Top Tether anchorage
1
down‐
- Quick Links:
- Cockpit
Hide quick links:
Advertisement
Table of Contents
