Mercedes-Benz E CLASS 2020 Operator's Manual page 154

152 Driving and parking
You stop at a stop sign when there is no vehi‐
R
cle in front of you.
You turn the steering wheel hard at a low
R
speed.
The engine is restarted automatically if:
You release the brake pedal in transmission
R
position h when the HOLD function is not
active and one of the following conditions are
met:
Drive program A or ; is not selec‐
-
ted.
Drive program A or ; is selected
-
but the does not start to move.
Drive program A or ; is selected,
-
the vehicle is moving at a speed of more
that 15 mph (20 km/h) and glide mode is
not activated.
You engage transmission position h or k.
R
You release the brake pedal, the vehicle is
R
not in glide mode and it starts to move on a
gentle downhill gradient at a speed below
2 mph (3 km/h).
You depress the accelerator pedal.
R
You engage drive program B.
R
An automatic engine start is necessary.
R
ECO start/stop function symbols in the multi‐
function display:
The è symbol (green) appears when the
R
vehicle is at a standstill: the engine was
switched off by the ECO start/stop function.
The ç symbol (yellow) appears when the
R
vehicle is at a standstill: not all vehicle condi‐
tions for an engine stop have been met.
Neither the è nor ç symbol appears
R
when the vehicle is at a standstill: an intelli‐
gent stop inhibitor was detected, e.g. a stop
sign.
If the engine was switched off by the ECO start/
stop function and you leave the vehicle, a warn‐
ing tone sounds and the engine is not restarted.
The Vehicle Ready to Drive Switch the Ignition
Off Before Exiting display message also appears
in the multifunction display. If you do not switch
off the ignition, the ignition is automatically
switched off after three minutes.
Deactivating or activating the ECO start/
stop function
Press button 1.
#
If indicator lamp 2 lights up, the ECO start/
stop function is activated.
% Depending on the model and the vehicle
equipment, the button may also be located
at a different position in the center console.