Mercedes-Benz E CLASS 2020 Operator's Manual page 428

426 Wheels and tires
Position jack 2 at jack support point 1.
#
Turn ratchet 3 clockwise until jack
#
completely on jack support point
base of the jack lies evenly on the ground.
Turn ratchet 3 until the tire is raised a maxi‐
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements:
The vehicle is raised (
R
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may not recog‐
nize dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
2 sits
#
pletely.
1 and the
page 426).
page 424).
/
Screw alignment bolt
#
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
#
pletely.
Remove the wheel.
#
Install the new wheel (
#
Mounting a new wheel
Requirements:
The wheel is removed (
R
1 into the thread
page 426).
/
page 426).
/