Mercedes-Benz E CLASS 2020 Operator's Manual page 409

Observe the load-bearing capacity of
#
the tires.
The load-bearing capacity must be at
#
least half the gross axle weight rating of
the vehicle.
Never overload the tires by exceeding
#
the maximum load.
The Tire and Loading Information placard is on
the B-pillar on the driver's side of the vehicle.
1 Tire and Loading Information placard
% The data shown in the illustration is example
data.
The Tire and Loading Information placard shows:
Maximum number of seats 2 according to
R
the maximum number of people permitted to
travel in the vehicle.
Maximum permissible load 3 comprises the
R
gross weight of all vehicle occupants, load
and luggage.
Wheels and tires 407
Recommended tire pressures 1
R
tires. The recommended tire pressures are
valid for the maximum permissible load and
up to the maximum permissible vehicle
speed.
Please also note:
Information on permissible weights and loads
R
on the vehicle identification plate
( page 432).
/
Information on tire pressure in the tire pres‐
R
sure table ( page 400).
/
Further related subjects:
Determining the maximum permissible load
R
( page 407)
/
Notes on tire pressure ( page 399).
R /
Steps for Determining Correct Load Limit
The following steps have been developed as
required of all manufacturers under Title 49,
Code of U.S. Federal Regulations, Part 575, pur‐
suant to the "National Traffic and Motor Vehicle
Safety Act of 1966".
for cold