Mercedes-Benz E CLASS 2020 Operator's Manual page 487

Display messages Possible causes/consequences and
Û
* The 48 V on-board electrical system has function restrictions. Convenience functions may be restricted.
48 V Battery See Opera-
tor's Manual
Cannot Start Engine See * The charge level of the 48 V battery is too low. You can no longer start the engine.
Operator's Manual
* The 48 V battery has been charged automatically via the voltage converter.
Engine Can Now Be Started
Ý
* The 48 V battery is discharged. You have switched on the ignition while the 12 V battery was being charged with a
Please Wait Charging 48 V
Battery...
Consult a qualified specialist workshop immediately.
#
Switch off electrical consumers that are not required.
#
Connect a suitable charger approved for Mercedes-Benz with sufficient charge output to the jump-start connec‐
#
tion point of the 12 V battery (
/
The 48 V battery is charged via the voltage converter in the vehicle.
Start the engine and drive the vehicle for a while to charge the 12 V battery and the 48 V battery.
#
suitable charger or while another vehicle was providing starting assistance.
The discharged 48 V battery is charged automatically via the voltage converter. After a few minutes, the
Can Now Be Started display message will be shown on the multifunction display.
Start the engine.
#
Drive the vehicle for a while to charge the 12 V battery and the 48 V battery after disconnecting the charger
#
from the vehicle.
Display messages and warning/indicator lamps 485
M M Solutions
page 386).
Engine