Supermicro X11DPH-I User Manual page 45

Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting
both pins will power on/off the system. This button can also be confi gured to function as a
suspend button (with a setting in the BIOS - see Chapter 4). To turn off the power when the
system is in the suspend mode, press the button for 4 seconds or longer. Refer to the table
below for pin defi nitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin defi nitions.
BMC
ASPEED
JSDCARD1
AST2500 LAN
CTRL
Battery
BT1
MH4
MH11
MAC CODE
LE3
LE4
BAR CODE
JBT1
BIOS
Intel
PCH
JRK1
SATA2 SATA1
JL1
FANB FANA FAN4 FAN3
Power Button
Pin Defi nitions (JF1)
Pins Defi nition
1 Signal
2 Ground
Reset Button
Pin Defi nitions (JF1)
Pins Defi nition
3 Reset
4 Ground
USB 2/3(3.0)
VGA
FAN5
LAN2 LAN1
IPMI_LAN
FAN6
USB 0/1(3.0)
CPU2
X11DPH-i
REV: 1.10
BIOS LICENSE
CPU1
45
1. PWR Button
COM1
2. Reset Button
1 2
1
Power Button
2
Reset Button
3.3V
UID LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
JF1
NMI
19 20
Chapter 2: Installation
Ground
Ground
Power Fail LED
OH/PWR/Fail/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
HDD LED
PWR LED
Ground