Supermicro X11DPH-I User Manual page 30

Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual
Preparing the CPU Socket for Installation
This motherboard comes with the CPU socket pre-assembled in the factory. The CPU socket
contains 1) a dust cover, 2) a socket bracket, 3) the CPU (P0) socket, and 4) a back plate.
These components are pre-installed on the motherboard before shipping.
Removing the Dust Cover from the CPU Socket
Remove the dust cover from the CPU socket, exposing the CPU socket and socket pins as
shown on the illustration below.
Note: Do not touch the socket pins to avoid damaging them, causing the CPU to
malfunction.
CPU Socket w/Dust Cover On
Dusk Cover
Remove the dust cover from
the CPU socket. Do not
touch the socket pins!
CPU Socket
30
Socket Pins