Supermicro X11DPH-I User Manual page 146

Super X11DPH-i/X11DPH-T/X11DPH-Tq User Manual
The fi le system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32)
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM fi le if the media size becomes too
large due to the huge volumes of folders and fi les stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below.
1. Using a different machine, copy the "Super.ROM" binary image fi le into the Root "\"
directory of a USB device or a writable CD/DVD.
Note: If you cannot locate the "Super.ROM" fi le in your drive disk, visit our website at
www.supermicro.com
into a USB fl ash device and rename it "Super.ROM" for the BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and reset the system when the following screen appears.
to download the BIOS package. Extract the BIOS binary image
146