Supermicro X11DPH-I User Manual page 201

Appendix G: Confi guring iSCSI Settings
iSCSI Mode
Use this feature to set the iSCSI mode. The options are Disabled, Enabled, and Enabled
for MPIO. Multipath I/O (MPIO) is a feature that allows the system to route I/O through the
available paths if the active path fails (be sure to have more than one physical path connected
to the system).
Note: Enabling the feature, iSCSI Mode, is required for iSCSI confi guration.
Internet Protocol
Use this feature to set the Internet protocol. The options are IPv4, IPv6, and Autoconfi gure.
201