Maintenance; Recommended Maintenance Schedule(S) - Toro TITAN MX5480 Operator's Manual

Zero-turn-radius riding mower
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
Before each use or daily
After each use
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Monthly
Yearly or before storage
Important: Refer to your engine operator's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Maintenance Procedure
• Change the engine oil.
• Change the hydraulic system filter and oil.
• Check the safety interlock system.
• Check the engine oil level.
• Clean the air intake screen.
• Check the mower blades.
• Inspect the grass deflector for damage
• Clean the mower housing.
• Grease all lubrication points.
• Check tire pressure.
• Check the hydraulic oil level in the expansion tank.
• Inspect the belts for cracks and wear.
• Service the paper element. (more often in dusty, dirty conditions)
• Change the engine oil. (more often in dusty, dirty conditions)
• Check the spark plug(s).
• Replace the fuel filters (more often under dusty, dirty conditions).
• Replace the paper element. (more often in dusty, dirty conditions)
• Change the oil filter. (more often in dusty, dirty conditions)
• Change the hydraulic system filter and oil.
• Check the battery charge.
• Paint chipped surfaces.
• Check all maintenance procedures listed above before storage.
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan mx6080748717487274873Titan mx4880

Table of Contents