Fuel System Maintenance; Replacing The Fuel Filter - Toro TITAN MX5480 Operator's Manual

Zero-turn-radius riding mower
Table of Contents

Advertisement

Fuel System
Maintenance
DANGER
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property.
• Perform any fuel related maintenance when the
engine is cold. Do this outdoors in an open area.
Wipe up any gasoline that spills.
• Never smoke when draining gasoline, and stay
away from an open flame or where a spark may
ignite the gasoline fumes.

Replacing the Fuel Filter

Service Interval: Every 100 hours/Yearly (whichever comes
first) (more often under dusty, dirty
conditions).
1. Disengage the blade control switch (PTO), move the
motion control levers to the neutral lock position, and
set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Allow the machine to cool down.
4. Raise the seat and locate the fuel filters as shown in
Figure 44.
1
2
5
4
Figure 44
1. Fuel line from tank
2. In-line Fuel filter
3. Flow direction arrow
5. Squeeze the ends of the hose clamps together and slide
them away from the filter (Figure 45).
3
g017723
4. Fuel line to engine
5. Hose clamp
G008963
1. Fuel filter
2. Hose clamp
6. Remove the filter from the fuel lines.
7. Install a new filter with the flow direction arrow coming
from the fuel tank and pointing to the engine. Move
the hose clamps close to the filter (Figure 44) to secure
it in place.
38
1 2
3
Figure 45
3. Fuel line

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan mx6080748717487274873Titan mx4880

Table of Contents