Omron SYSMAC CS1W-LCB01 Operation Manual page 95

Specifications
Item
Offline operation functions
Online operation functions
Note
- Setting of function block ITEM data (including System Common block set-
tings)
- Software wiring of analog signals
- Pasting, displaying, and printing text-string comments (memos) in block or
ladder diagrams.
- Inputting Step Ladder Program block commands
- Inputting sequence tables
- Initializing Loop Controller memory (RAM)
- Downloading of function block data (download/upload to and from Loop
Controller)
- Run/stop command for Loop Controller (all function blocks)
- System monitor run status: Monitoring/manipulation of System Common
block (Block Model 000) (including monitoring of LCB load rate)
- Loop Controller monitor run status: Confirmation of function block wiring
operation (including operation stop/stop cancel on each function block),
confirmation of Step Ladder Program operation, and validation of sequence
tables
- Autotuning PID constants and other parameters.
Precautions on Operating Systems That Are Compatible with CX-One
(1) The required system and required hard disk space depend on the system
environment.
(2) Operation is not possible on the 64-bit edition of Windows XP.
Specification
Section 1-3
61