Omron SYSMAC CS1W-LCB01 Operation Manual page 113

Connecting to CX-Process Tool
Unit Port location
CPU Unit Built-in peripheral
port
Unit
CPU Unit Built-in peripheral port
Unit
CPU Unit Built-in RS-232C port
Female 9-pin D-SUB
Serial Communica- RS-232C Port
tions Board or Unit Female 9-pin D-SUB
The following components are used to connect RS-232C cable to the periph-
eral port. Connect to a male 9-pin D-Sub serial port on an IBM PC/AT or com-
patible computer.
Serial
Communications
Mode
Host Link CS1W-CN118 +
(SYSMAC WAY) XW2Z-200S-CV
or Peripheral Bus
CS1W-CN118 +
(Toolbus)
XW2Z-200S-V
The following components are available for connecting the CQM1CIF01 or
CQM1-CIF02 Cable to the peripheral port. Connect to a male 9-pin D-Sub
serial port on an IBM PC/AT or compatible computer.
Port on Unit
Communications
Host Link
(SYSMAC WAY)
The following components are available for connecting the IBM PC/AT or com-
patible over RS-232C. Connect to a male 9-pin D-Sub serial port.
Port on Unit
Communications
Host Link
(SYSMAC WAY)
Model Length
0.1 m + (2
or 5 m)
Serial Model
Mode
CS1W-CN114 +
CQM1-CIF02
Serial Model
Mode
XW2Z-200S-V
XW2Z-500S-V
XW2Z-200S-V
XW2Z-500S-V
Section 2-3
Remarks
The XW2Z-@@@S-CV is an anti-
static connector.
---
Length Remarks
0.5 m + 3.3 m ---
Length Remarks
2 m ---
5 m
2 m
5 m
79