Omron SYSMAC CS1W-LCB01 Operation Manual page 86

Specifications
Item
Recovery from flash memory to RAM
Influence on CPU Unit cycle time
Current consumption (supplied from Power Supply
Unit)
Standard accessories
52
Specification
Automatic at power ON if startup mode is set for a cold start, or
executed from CX-Process Tool (as required).
Loop Control Boards (CS1W-LCB01/05): 0.8 ms max. (Depends
on function block contents.)
Process-control CPU Units (CS1D-LCB05D): 25 ms max.
(Depends on function block contents.)
For details, refer to Example of the Influence of the Process-control
CPU Unit's Loop Controller on Normal Cycle Time on page 41.
Loop-control CPU Unit (CJ1G-CPU@@P): 0.8 ms max. (Depends
on function block contents.)
Loop Control Board: 0.22 A at 5 V DC
Process-control CPU Unit (CPU Unit element): 0.82 A at 5 V DC
Loop Control element: 0.22 A at 5 V DC
Loop-control CPU Unit: 1.06 A at 5 VDC
Note: Increased by 150 mA when NT-AL001 Link Adapter is used.
None
Section 1-3