Omron SYSMAC CS1W-LCB01 Operation Manual page 61

Outline
Category Type
Operation Time 141
Block (con- Function
(See note
1.)
tinued)
143
(See note
1.)
145
(See note
1.)
147
(See note
1.)
148
(See note
1.)
149
(See note
1.)
150
151
153
(See note
1.)
155
156
157
158
(See note
7.)
601
602
Block Block Name
Model
First-order Lag
Rate-of-change
Limit
Moving Average Performs moving average operation on sin-
Lead/Delay
Dead Time
Dead Time
Compensation
Accumulator for
instantaneous
value input
Run Time Accu-
mulator
Time Sequence
Data Statistics
Ramp Program
Segment Pro-
gram
Segment Pro-
gram 2
Segment Pro-
gram 3
Step Data
Bank Data
Function
Performs first-order lag operation on single
analog signals.
Performs rate-of-change restriction on sin-
gle analog signals.
gle analog signals.
Performs lead/delay operation on single
analog signals.
Performs dead time and first-order lag
operations on single analog signals.
Used for Smith's dead time compensation
PID control
Accumulates analog signals, and outputs
8-digit accumulated value signals.
Accumulates the operating time, and out-
puts the pulse signal per specified time.
Records time sequence data from analog
signals and calculates statistics, such as
averages and standard deviations.
Ramp program setter for combining ramps
for time and hold values.
Segment program setter setting the output
values with respect to time.
Segment program setting with wait function
for setting the output values with respect to
time
Segment program setting with wait function
and bank (e.g., PID) switching function for
setting output values with respect to time.
Expansion settings for Segment Program 3
block (Block Model 158). Sets step data,
such as the time width and output value.
Expansion settings for Segment Program 3
block (Block Model 158). Sets bank data,
such as the PID constants.
Section 1-1
Allocatable Block
Address
LCB05/05D: 001 to 500
LCB03: 001 to 300
LCB01: 001 to 050
LCB05/05D: 001 to 100
LCB03: 001 to 100
LCB01: 001 to 050
LCB05/05D: 001 to 500
LCB03: 001 to 300
LCB01: 001 to 050
27