Advertisement
PROGRAMMING GUIDE
Programming Options (cont.)
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press
to change the number value. Press
repeatedly
and press
.
Access Code - sets the access code entered to access programming mode (the factory default is 1-2-3-4).
Once accessed, press
number value (range is 1 to 4). Press
press
.
Banner Name - changes the banner name that appears on the display (the factory default is Curtis). No
banner name appears when all blanks are entered. Once accessed, press
change. Then press
change or choose ex and press
Warmer Auto-Off - (some models) adjusts the length of time that elapses before the satellite warmer shuts off
to 12 hours. Once accessed, press
P-Maintenance - turns on/off and adjusts the P-Maintenance (preventive maintenance) brew monitor
(the factory default is OFF). When ON, the UCM measures the number of gallons brewed before the
or
to choose the desired setting, then, press
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off (the factory default is
ON). Once accessed, press
Drip-out Mode -
to drain from the brew basket before the brew basket lock releases (the factory default is 2 min.). This feature
reduces the chance that the brew basket will be removed too early. The range is OFF to 5 minutes. Once
accessed, press
or
Warmers Default - (some models) sets the warmer temperature (the factory default is MED). The available
accessed, press
or
the desired setting for the second warmer, then press
series models.
Display Brew Time - turns the display of the brew time during brewing on or off (the factory default is ON).
Once accessed, press
Display Messages - turns display of the message "Rinse Server Before Brewing" ON or OFF (the factory
default is ON). Once accessed, press
QT Alarm On/Off - turns the quality timer alarm on or off (the factory default is OFF). An audible alarm goes
off when the quality timer has expired. Once accessed, press
press
to exit.
Satellite Color - (GEMX series models only) changes the color scheme of the quality timer LEDs. Once
accessed, press
or
or
to choose the desired color to indicate "expired". Press
or
to choose the number to change. Then press
or
to choose the next number to change or choose exit and
to change the number value. Press
repeatedly
to exit.
or
to adjust the number of hours. Then press
or
to choose the desired setting. Then, press
to choose desired setting, then, press
to choose the desired setting, then press
or
to choose the desired setting, then press
or
to choose the desired setting, then press
to choose the desired color to indicate "fresh" (ON). Press
or
to choose the number to be changed. Then press
or
to choose the next number to change or choose exit
or
to exit.
to exit.
. On twin brewers
Press
to exit. *OFF option not available on GEMX
.
to exit.
or
to choose the desired setting. Then,
to save and exit.
repeatedly to change the
or
to choose the letter to
to choose the next number to
to set and exit.
to exit.
press
or
to choose
to exit.
to save, then press
PG2
Advertisement
