Advertisement
PROGRAMMING GUIDE
Programming Options (cont.)
Brew Button Programming Menu
Exit appears on the display. Press
Brew by Volume -
desired volume is reached, press the same BREW button again to stop the brew cycle and set the volume.
Brew by Time - adjusts the amount of coffee brewed by time rather than by volume (the factory defaults are
LARGE 5min-25sec., MEDIUM 3min-32sec., SMALL 1min-52sec). Once accessed, press
Pre-Infusion - sets the brewer Pre-Infusion time (Pulse Brew must be off to access, the factory default is
seconds. Once accessed, press
When Pre-infusion is ON, Pulse Brew disappears from the list of menu items.
Pulse Brew - selects the pulse brew pattern (Pre-Infusion must be off to access, the factory default is C). The
choose the desired setting. Then, press
disappear from the list of program selections.
Setting
Description
A
Toward the beginning of brew cycle: 4 cycles of 10 seconds on and 10 seconds off, then on until end of brew cycle.
B
1 minute on, then 4 cycles of 10 seconds off and 10 seconds on, then on until end of brew cycle.
C
Starts at beginning of brew cycle. 5 cycles of 25 seconds on and 20 seconds off, then on until end of brew cycle.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 20. Pulse on time and off
D
time are both adjustable from 5 to 150 seconds.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 8. Pulse on time and off
E
time are both adjustable from 1 to 150 seconds.
Pulse Brew Guidelines
•
Filter pack type coffees typically extract better with the A and B pulse setting.
•
Decaffeinated coffees typically extract better with the B pulse setting.
•
High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
•
Settings D and E are manual pulse counts.
By-Pass -
to exit, then re-enter the Brew Button Program to program the next one.
repeatedly
repeatedly
to exit.
or
to choose the desired setting, then, press
to exit.
or
to change the number value. Press
to change the number value. Press
to choose the desired setting, then, press
PG2
until
MEDIUM
or
until the
or
until the
or
until "ex"
to exit. To turn off pulse
or
to
to exit.
Advertisement
