Advertisement
PROGRAMMING GUIDE
*
To enter programming mode:
With unit OFF, press and hold
bottom right BREW button (4).
Then press and release
ON/OFF button (2). Continue to
hold down BREW button until
Enter Code appears.
Enter 4 digit code.
(factory default = 1-2-3-4)
* "Ready" on some models
1,2
1
1
Visible only when model
selected = Gemini-IF (Twin or Single)
2
Visible only when model
selected = GEMX (Twin or Single)
1,2
The symbols below the buttons are:
Once you enter programming mode, press
or RIGHT to the various menus (Global Recipes, Non Brew Prog,
Brew Button Prog, etc.). Press
press
2
desired menu item appears on the screen, press
access. See Programming Options for detailed descriptions.
Label style may vary
IMPORTANT:
All programming functions are performed
with the three center buttons.
Scroll LEFT/UP (1)
SELECT or ENTER to save new parameter (2)
Scroll RIGHT/DOWN (3)
(SELECT) to enter a menu. Then
or
to scroll UP or DOWN through a menu. When the
PG2
Factory default is
Gemini
®
Twin - One Batch
or
to scroll LEFT
(SELECT) to
Advertisement
