Solving Problems For Advanced Security - Epson EcoTank Pro M15180 Series User Manual

Administrator Information
Checking IEEE802.1X Network Status
You can check the IEEE802.1X status by printing a network status sheet.
Status ID
Disable
EAP Success
Authenticating
Config Error
Client Certificate Error
Timeout Error
User ID Error
Server ID Error
Server Certificate Error
CA Certificate Error
EAP Failure
Related Information
"Printing a Network Status Sheet" on page 233
&

Solving Problems for Advanced Security

Restoring the Security Settings
When you establish a highly secure environment such as IPsec/IP Filtering or IEEE802.1X, you may not be able to
communicate with devices because of incorrect settings or trouble with the device or server. In this case, restore
the security settings in order to make settings for the device again or to allow you temporary use.
>
Advanced Security Settings
IEEE802.1X feature is disable.
IEEE802.1X authentication has succeeded and network connection is available.
IEEE802.1X authentication has not been completed.
Authentication has failed since the user ID has not been set.
Authentication has failed since the client certificate is out of date.
Authentication has failed since there is no answer from the RADIUS server and/or
authenticator.
Authentication has failed since the printer's user ID and/or certificate protocol is
incorrect.
Authentication has failed since the server ID of the server certificate and the
server's ID do not match.
Authentication has failed since there are the following errors in the server
certificate.
❏ The server certificate is out of date.
❏ The chain of the server certificate is incorrect.
Authentication has failed since there are the following errors in a CA certificate.
❏ Specified CA certificate is incorrect.
❏ The correct CA certificate is not imported.
❏ CA certificate is out of date.
Authentication has failed since there are the following errors in the printer
settings.
❏ If EAP Type is EAP-TLS or PEAP-TLS, client certificate is incorrect or has
certain problems.
❏ If EAP Type is EAP-TTLS or PEAP/MSCHAPv2, user ID or password is not
correct.
370
>
Solving Problems for Advanced Security
IEEE802.1X Status