Solving Problems For Advanced Security - Epson WorkForce Pro WF-C879RBAM User Manual

Administrator Information
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&
"Configuring a CA-signed Certificate" on page 534
&
"Updating a Self-signed Certificate" on page 538
&
Importing the Encryption Certificate to the Email Destination
To use email encryption, you need to import an encryption certificate for each destination registered in the
contacts list.
This section explains the procedure to import an encryption certificate to the email destination registered in the
contacts list.
1. Access Web Config and select the Scan/Copy or Fax tab > Contacts.
2. Select the destination number for which you want to import the encryption certificate, and then click Edit.
3. Import the encryption certificate to the destination for Encryption Certificate or Change encryption
certificate.
4. Click Apply.
When an encryption certificate has been imported, a key icon is displayed on the contacts list.
Note:
You can check the certificate information for Encryption certificate status by selecting the destination number to which you
have imported the encryption certificate and clicking Edit.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 374
&

Solving Problems for Advanced Security

Restoring the Security Settings
When you establish a highly secure environment such as IPsec/IP Filtering or IEEE802.1X, you may not be able to
communicate with devices because of incorrect settings or trouble with the device or server. In this case, restore
the security settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using the Control Panel
You can disable IPsec/IP Filtering or IEEE802.1X using the printer's control panel.
1. Select Settings > General Settings > Network Settings.
2. Select Advanced.
>
Advanced Security Settings
558
>
Solving Problems for Advanced Security