Table of Contents
Advertisement
Maintaining the Printer
3. Close the ADF cover, and then open the document cover.
4. Clean the part that is shown in the illustration.
Important:
c
❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of
glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid.
❏ Do not press the glass surface too hard.
❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan
quality.
Cleaning the Translucent Film
When the printout is not improved after aligning the print head or cleaning the paper path, the translucent film
inside the printer may be smeared.
Items required:
>
Improving Print, Copy, and Scan Quality
123
>
Cleaning the Translucent Film
Advertisement
Table of Contents
