Table of Contents
Advertisement
Placing Originals
>
Originals that are not Supported by the ADF
Important:
c
Do not feed photographs or valuable original artwork into the ADF. Misfeeding may wrinkle or damage the
original. Scan these documents on the scanner glass instead.
To prevent paper jams, avoid placing the following originals in the ADF. For these types, use the scanner glass.
❏ Originals that are torn, folded, wrinkled, deteriorated, or curled
❏ Originals with binder holes
❏ Originals held together with tape, staples, paper clips etc.
❏ Originals that have stickers or labels stuck to them
❏ Originals that are cut irregularly or not right angled
❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Detecting the Original Size Automatically
When you select Auto Detect as the paper setting, the following types of paper size are identified automatically.
❏ Placing vertically: A4, 16K
Place the long edge of the original toward the paper feed entrance of the ADF or the left side of the scanner
glass.
❏ Placing horizontally: A3, B4, A4, B5, A5, 8K
Place the short edge of the original toward the paper feed entrance of the ADF or the left side of the scanner
glass.
*:The paper is detected when K Size Priority is enabled. However, it may not be detected depending on the
functions you are using. See "Related Information" below for more details.
Detecting the Original Size Automatically
*
*
, 16K
*
36
Advertisement
Table of Contents
