Solving Problems For Advanced Security; Restoring The Security Settings; Problems Using Network Security Features - Epson SureColor SC-T7700D Administrator's Manual

Administrator's Guide
Status ID
EAP Failure

Solving Problems for Advanced Security

Restoring the Security Settings

When you establish a highly secure environment such as IPsec/IP Filtering or IEEE802.1X, you may not be able to
communicate with devices because of incorrect settings or trouble with the device or server. In this case, restore
the security settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using the Control Panel
You can disable IPsec/IP Filtering or IEEE802.1X using the printer's control panel.
1. Select Menu > General Settings > Network Settings.
2. Select Advanced.
3. Select from the following items that you want to disable.
❏ Disable IPsec/IP Filtering
❏ Disable IEEE802.1X
4. Select Proceed on the confirmation screen.
5. When a completion message is displayed, select Close.
The screen automatically closes after a specific length of time if you do not select Close.

Problems Using Network Security Features

Forgot a Pre–shared Key
Re-configure a pre-shared key.
To change the key, access Web Config and select the Network Security tab > IPsec/IP Filtering > Basic > Default
Policy or Group Policy.
When you change the pre-shared key, configure the pre-shared key for computers.
Advanced Security Settings for Enterprise
Authentication has failed since there are the following errors in the printer
settings.
❏ If EAP Type is EAP-TLS or PEAP-TLS, client certificate is incorrect or has
certain problems.
❏ If EAP Type is EAP-TTLS or PEAP/MSCHAPv2, user ID or password is not
correct.
103
IEEE802.1X Status