Environmental Protection And Saving; Dispose Of Packaging; Saving Energy And Resources - Bosch WGG244M40 Instructions For Use And Assembly

de Environmental protection and saving
Unsuitable cleaning agents can
damage the surfaces of the device.
Do not use harsh or abrasive
▶
cleaning agents.
Do not use cleaning agents that
▶
contain strong alcohol.
Do not use hard abrasive pads or
▶
cleaning sponges.
Only clean the device with water
▶
and a soft, damp cloth.
▶
If you come into contact with the device,
immediately remove all detergent
residues, spray residue or residues.
3
Environmental protection and
Save

3.1 Dispose of packaging

The packaging materials are
environmentally friendly and recyclable.
▶
Dispose of the individual components
separately according to type.
3.2 Saving energy and
resources
If you follow these guidelines, your
device will use less electricity and
water.
Use programs with low temperatures
and longer washing times and utilize
the maximum load capacity.
a The energy consumption and water
water consumption is the most efficient.
12th
Dose detergent according to the
degree of soiling of the laundry.
a For light to normal soiling
a smaller amount of detergent is
sufficient. Observe the dosage
recommendation of the detergent
manufacturer.
Reduce the washing temperature for
lightly and normally soiled laundry.
a At lower temperatures
the device uses less energy. For
light to normal soiling,
temperatures lower than those
indicated on the care label are
sufficient.
Set the maximum spin speed if the
laundry is then to be dried in the
tumble dryer.
a Dryer laundry shortens the time
Program duration while drying and
reduces energy consumption. With
a higher spin speed, the residual
moisture in the laundry decreases
and the volume of the spinning
noise increases.
Wash laundry without prewash.
a Wash with prewash
extends the duration of the
program and increases energy
and water consumption.
The device has an automatic quantity
control.
a The automatic amount fits that
The water consumption and the duration of the
program are optimally adapted to the type of
textile and the amount of load.