Table of Contents
Advertisement
de Troubleshooting
disturbance
Spin program
does not start.
Rustling, zi-
screeching sound.
Loud noises
end of skidding.
Rattling noises,
Rattling in the drain
pump.
Slurping, rhythmic
nice sucking noise.
Wrinkling.
44
Cause and troubleshooting
The drain pipe or water drainage hose is blocked.
Clean the drain pipe and water drain hose.
▶
The drain pipe or water drainage hose is kinked or
pinched.
Make sure that the drain pipe and water drainage
▶
hose are not kinked or pinched.
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Notice: Place large and small items of laundry
together in the drum. Laundry items of different sizes
are better distributed during spinning.
Start the program Fling.
▶
Water is flushed into the detergent drawer under
pressure.
Not a fault - normal operating noise.
▶
Device is not aligned correctly.
Align the device
▶
The feet of the device are not fixed.
Fix the device feet. Align the device
▶
Transport locks are not removed.
Remove the transport locks
▶
Foreign matter has got into the drain pump.
→
"Cleaning the drain pump ", page 35
▶
The detergent solution pump is active, the detergent solution is
pumped out.
Not a fault - normal operating noise.
▶
Spin speed is too high.
Set a lower spin speed for the next wash cycle.
▶
Load is too high.
For the next wash cycle, reduce the load.
▶
The wrong program has been selected for the type of fabric.
Select suitable programs for the type of textile.
▶
Advertisement
Table of Contents
