de Troubleshooting
disturbance
shines.
flashes.
All other error codes
of.
"E: 30 / -20"
Device works
not.
Program starts
not.
40
Cause and troubleshooting
Remove jammed laundry.
2.
Close the door.
3.
To start the program, press Start / reload.
4th
Door is not closed.
Close the door.
1.
To start the program, press Start / reload.
2.
Malfunction
Call customer service.
▶
→
"Customer Service ", page 48
Solenoid valve defective.
Call customer service.
▶
→
"Customer Service ", page 48
Detergent dosage is too high.
For the next wash cycle with the same load, reduce
▶
the amount of detergent.
Filled in additional water.
Do not add additional water to the device during
▶
operation.
Mains plug of the power cord is not plugged in.
Connect the device to the mains.
▶
Fuse is defective.
Check the fuse in the fuse box.
▶
Power supply has failed.
Check that the room lighting or other devices in
▶
the room are working.
Start / reload was not pressed.
Press Start / reload.
▶
Door is not closed.
Close the door.
1.
To start the program, press Start / reload.
2.
Child lock is activated.
→ "Deactivating childproof lock ", page 33
▶
Completed in is activated.
check if Completed in is activated.
▶
→ "Keys ", page 23