Table of Contents
Advertisement
Loosen and remove all screws of
2.
the 4 transport locks with an SW13
wrench.
Pull the power cord out of the
3.
holder.
Remove the 4 sleeves.
4th
Set up and connect de
Insert the 4 cover caps.
5.
Press down the 4 cover
6th
caps.
4.5 Connect the device
Water inlet hose
connect
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
Do not immerse the electric
▶
Aquastop valve in water.
Notice: Make sure that you connect
the device to a water inlet with a
safety device against drinking water
contamination through backflow
(according to DIN EN 1717). The
connection valves / taps provided for
this purpose are
15th
Advertisement
Table of Contents
