Bosch WGG2449RAU User Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WGG2449RAU
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WGG2449RAU

  • Page 1 Washing machine WGG2449RAU [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Further information and explanations are available online: Table of contents 1 Safety ...........  4 8 Buttons ........  22 1.1 General information.... 4 9 Programmes ......  24 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories......  28 1.4 Safe installation ...... 5 11 Laundry........  28 1.5 Safe use ........
  • Page 3 15 Basic settings......  33 15.1 Overview of the basic set- tings........ 33 15.2 Changing the basic set- tings........ 34 16 Programme counter ....  34 16.1 Calling up the programme counter ........ 34 17 Cleaning and servicing ...  34 17.1 Cleaning the drum.... 34 17.2 Cleaning the detergent drawer........
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Never make any technical modifications to the appliance or its features. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶...
  • Page 10: Preventing Material Damage

    en Preventing material damage Make sure that the length of the ▶ Preventing material damage 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Preventing material damage ATTENTION! able to operate properly.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy...
  • Page 12: Installation And Connection

    en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order.
  • Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. power cord or Do not install or operate this appli- ▶ the hoses ance anywhere that is liable to ex- between the wall...
  • Page 14: Connecting The Appliance

    en Installation and connection Unscrew and remove all of Put on the 4 cover caps. the screws for the 4 transit bolts using a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves.
  • Page 15 Installation and connection en Connect the water inlet hose to a Plastic pipe with Fix and secure tap (26.4 mm = 3/4"). rubber sleeve or the water outlet gully hose with an el- bow. → "Accessories", Page 28 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply Open the water tap carefully and with the local legal provisions and...
  • Page 16: Aligning The Appliance

    en Installation and connection Use a WAF 17 wrench to tighten 4.6 Aligning the appliance the lock nuts against the housing In order to reduce noise and vibra- until they are hand-tight. tion and to prevent the appliance from moving, align the appliance cor- rectly.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 18: Control Panel

    en Familiarising yourself with your appliance Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 29 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
  • Page 19: Before Using For The First Time

    Before using for the first time en Add washing powder containing Before using for the first time 6 Before using for the oxygen bleach to compartment II. first time Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory.
  • Page 20: Display

    en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. "10" / Fin- Program end time ished in) → "Buttons", Page 22 Recommendation for the maximum load capacity for the selected program in kg.
  • Page 21 Display en Display Description Programme status: Spinning Programme status: Programme end ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 32 Easy Iron) The crease-reduction function is activated. → "Buttons", Page 23 Prewash) Prewash is activated.
  • Page 22: Buttons

    en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information ⁠   Start/Reload ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ⁠   SpeedPerfect ¡ Activate Activate or deactivate a shorter pro- gramme duration.
  • Page 23 Buttons en Button Selection More information ⁠   Rinse Plus ¡ Activate Activate or deactivate a washing pro- gramme with more water and an addi- ¡ Deactivate tional rinse cycle. Recommended for particularly sensit- ive skin or in regions with very soft water.
  • Page 24: Programmes

    en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) ⁠   Cottons Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short program when you activate ⁠...
  • Page 25 Programmes en Programme Description Max. load (kg) Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm ⁠   ⁠   Wool Hand- or machine-washable items that are made from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses.
  • Page 26 en Programmes Programme Description Max. load (kg) Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm ⁠   Sportswear Wash sports and leisure items made from synthetic fibres, microfibre or fleece. Use a detergent that is suitable for sports items. Do not use fabric softener. Tip: Use the ⁠...
  • Page 27: Laundry

    Programmes en Programme Description Max. load (kg) ⁠ / ⁠   Super 15'/ Wash items made from cotton, or synthetic or blen- ded fabrics. Short programme for small items of lightly soiled laundry. The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate ⁠...
  • Page 28: Preparing The Laundry

    en Accessories Accessories 10 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx. 2.50 m). Fixing brackets Improves the stability of the appliance. WMZ2200 Elbow Secure the water outlet hose in place.
  • Page 29: Basic Operation

    Basic operation en ¡ Do not use products containing 13.4 Loading laundry solvents, caustic agents or volatile Note: To prevent creasing, note the substances maximum load for the programmes. ¡ Do not use chlorine bleach → "Programmes", Page 24 ¡ Do not use dyes regularly as fixing salt can damage stainless steel Requirements ¡...
  • Page 30: For Liquid Detergent

    en Basic operation Insert the measuring aid. Fold the measuring aid down and click it into place. Insert the detergent drawer. Push in the detergent drawer. 13.6 Use the measuring aid 13.7 Adding detergent and for liquid detergent care product To add liquid detergent, you can use a measuring aid in the detergent Notes drawer.
  • Page 31: Soaking Laundry

    Basic operation en – If the temperature is high, start 13.9 Soaking laundry ⁠   Rinse programme. Note: No additional detergent is re- – If the water level is high, start quired for soaking. The appliance ⁠   Spin programme or select uses the filled detergent for soaking a suitable programme for drain- and washing.
  • Page 32: Childproof Lock

    en Childproof lock Childproof lock 14 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 14.1 Activating the childproof lock Press and hold the two ⁠   3 sec. ▶ buttons for approx. 3 seconds. a The display shows a The control elements are locked.
  • Page 33: Basic Settings

    Basic settings en Basic settings 15 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
  • Page 34: Changing The Basic Set- Tings

    en Programme counter 15.2 Changing the basic set- Cleaning and servicing 17 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. Cleaning and servicing ciently for a long time, it is important to clean and maintain it carefully. 17.1 Cleaning the drum CAUTION Risk of injury!
  • Page 35: Cleaning The Drain Pump

    Cleaning and servicing en Press down on the insert and re- Fit the insert and click it into place. move the detergent drawer. Clean the opening for the deter- Pull out the insert upwards. gent drawer. Clean the detergent drawer and in- Push in the detergent drawer.
  • Page 36 en Cleaning and servicing Open and remove the mainten- CAUTION - Risk of scalding! ance flap. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
  • Page 37 Cleaning and servicing en Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 35 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
  • Page 38 en Cleaning and servicing Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied the drain pump. Open the water tap. Insert the mains plug. Switch on the appliance.
  • Page 39: Troubleshooting

    Troubleshooting en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 40 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 41 Troubleshooting en Fault Cause and troubleshooting lights up. The temperature is too high. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 31 Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 24 flashes.
  • Page 42 en Troubleshooting Fault Cause and troubleshooting The programme does ⁠   Start/Reload has not been pressed. not start. Press ⁠   Start/Reload. ▶ Door is not closed. Close the door. ▶ Childproof lock is activated. Deactivate childproof lock. ▶ → "Deactivating the childproof lock", Page 32 ⁠...
  • Page 43 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Reduce the amount of detergent for the next wash- ▶ ing. ing cycle with the same load. Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶...
  • Page 44 en Troubleshooting Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
  • Page 45 Troubleshooting en Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
  • Page 46 en Troubleshooting Fault Cause and troubleshooting Detergent or fabric Too much detergent/fabric softener in the detergent softener drips off the drawer. seal and collects on When dosing liquid detergent and fabric softener, ▶ the door or in the seal observe the marking in the detergent drawer and fold.
  • Page 47 Troubleshooting en Fault Cause and troubleshooting Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. → "Connecting the water inlet hose", Page 14 Tighten the screw connection. Water is leaking out at The water outlet hose is damaged.
  • Page 48: Emergency Release

    en Transportation, storage and disposal 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 35 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
  • Page 49: Disposing Of Old Appliance

    Customer Service en 19.4 Disposing of old appli- Customer Service 20 Customer Service ance Detailed information on the warranty Customer Service Valuable raw materials can be re- period and terms of warranty in your used by recycling. country is available from our after- sales service, your retailer or on our WARNING website.
  • Page 50 en Consumption values Consumption values 21 Consumption values The indicated consumption values are approximate. Consumption values The values may deviate from the indicated values depending on water pres- sure, water hardness, water inlet temperature, room temperature, type of laun- dry, amount and soiling of laundry, detergent used, fluctuations in the mains voltage and selected settings.
  • Page 51: Consumption Values

    Consumption values en 21.1 Information for test insti- Items Instruction tute According to AS NZS standard 2040.1-2005 AS NZS 2040.2-2005 AS NZ 6400-2016 Washing pro- ⁠   Cottons Eco gramme 60 °C, 9.0 kg, 1400 rpm Testing instruc- The dosage of tions detergent: 12.5 g/kg The dosage of anti sudsing Layer 1: tablecoth agent: 2 g/kg...
  • Page 52: Technical Data

    en Technical data Length of the 160 cm Items Instruction power cord into the drum in layers as shown in the table and pictures below. Make sure that swatches are flat and below the laundry item when loading items into the drum. Technical data 22 ...
  • Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents