Table of Contents
Advertisement
To align the device, turn the device
2.
feet. Check the alignment with a
spirit level.
All device feet must be firmly on
the floor.
Tighten the lock nuts hand-tight
3.
against the housing with an SW17
wrench.
Hold the device base firmly and
do not adjust the height.
4.7 Connect the device
electrically
Insert the plug of the power cord of
1.
the device into a socket near the
device.
The connection date
you in the Tec
→ Page 50
.
n the device's
Finnish data
Set up and connect de
Check that the power plug is firmly
2.
seated.
17th
Advertisement
Table of Contents
