Figure 8. Server top view for standard configurations
Table 18. Component identification (Top view)
Front backplane
1
Intrusion switch
3
Memory modules
5
Riser assemblies
note 1
7
System board (system board assembly)
9
Notes:
1. The illustration shows the server rear configuration with 2 riser assemblies. The server rear
configurations vary by server model. For details, see
Top view for the liquid cooling configuration
The following top view is based on liquid cooling configuration.
RAID flash power module
2
Fan modules
4
Processor and heat sink
6
Power supply units
8
Internal CFF HBA/RAID module
10
"Rear view" on page
23.
Chapter 2
.
Server components
29